Products

{"id":4667713355851,"title":"Civic (EP3) 03-05","handle":"civic-ep3-03-05","description":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/6k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-09-16T10:38:10-04:00","created_at":"2020-09-16T10:37:59-04:00","vendor":"CSE","type":"","tags":["CIVIC","HONDA"],"price":139500,"price_min":139500,"price_max":139500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32837259624523,"title":"8k\/8k","option1":"8k\/8k","option2":null,"option3":null,"sku":"YS01-HD-DPS014-8\/8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Civic (EP3) 03-05 - 8k\/8k","public_title":"8k\/8k","options":["8k\/8k"],"price":139500,"weight":27216,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_e0cdc406-af99-4282-be45-930ce18ad7b3.jpg?v=1600267080"],"featured_image":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_e0cdc406-af99-4282-be45-930ce18ad7b3.jpg?v=1600267080","options":["Rates"],"media":[{"alt":null,"id":8078265778251,"position":1,"preview_image":{"aspect_ratio":1.776,"height":2432,"width":4320,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_e0cdc406-af99-4282-be45-930ce18ad7b3.jpg?v=1600267080"},"aspect_ratio":1.776,"height":2432,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_e0cdc406-af99-4282-be45-930ce18ad7b3.jpg?v=1600267080","width":4320}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/6k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

Honda

$1,395.00

CSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track. Our suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance. ※ The linear rate spring can be selected with tailored...

CSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts,...

{"id":4667727904843,"title":"Civic (FB) 12-16 Non Si","handle":"civic-fb-12-16-non-si","description":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/8k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-09-16T10:54:52-04:00","created_at":"2020-09-16T10:54:52-04:00","vendor":"CSE","type":"","tags":["CIVIC","HONDA"],"price":139500,"price_min":139500,"price_max":139500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32837365268555,"title":"8k\/8k","option1":"8k\/8k","option2":null,"option3":null,"sku":"YS01-HD-DPS014-10 - 8\/8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Civic (FB) 12-16 Non Si - 8k\/8k","public_title":"8k\/8k","options":["8k\/8k"],"price":139500,"weight":27216,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_59fe5f83-5b21-466d-a1dc-dc40b810417c.jpg?v=1600268094"],"featured_image":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_59fe5f83-5b21-466d-a1dc-dc40b810417c.jpg?v=1600268094","options":["Rates"],"media":[{"alt":null,"id":8078354153547,"position":1,"preview_image":{"aspect_ratio":1.776,"height":2432,"width":4320,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_59fe5f83-5b21-466d-a1dc-dc40b810417c.jpg?v=1600268094"},"aspect_ratio":1.776,"height":2432,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_59fe5f83-5b21-466d-a1dc-dc40b810417c.jpg?v=1600268094","width":4320}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/8k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

Honda

Civic (FB) 12-16 Non Si

$1,395.00

CSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts,...

{"id":4667716337739,"title":"Civic (FD1) 06-11 spring on damper rear","handle":"civic-fd13-06-11-spring-on-damper-rear","description":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/6k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-09-16T10:41:06-04:00","created_at":"2020-09-16T10:41:06-04:00","vendor":"CSE","type":"","tags":["CIVIC","HONDA"],"price":139500,"price_min":139500,"price_max":139500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32837278924875,"title":"8k\/6k","option1":"8k\/6k","option2":null,"option3":null,"sku":"YS01-HD-DPS069-8\/6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Civic (FD1) 06-11 spring on damper rear - 8k\/6k","public_title":"8k\/6k","options":["8k\/6k"],"price":139500,"weight":27216,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_3ce1624a-28a1-4184-b508-4654451cad68.jpg?v=1600267267"],"featured_image":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_3ce1624a-28a1-4184-b508-4654451cad68.jpg?v=1600267267","options":["Rates"],"media":[{"alt":null,"id":8078280785995,"position":1,"preview_image":{"aspect_ratio":1.776,"height":2432,"width":4320,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_3ce1624a-28a1-4184-b508-4654451cad68.jpg?v=1600267267"},"aspect_ratio":1.776,"height":2432,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_3ce1624a-28a1-4184-b508-4654451cad68.jpg?v=1600267267","width":4320}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/6k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

Honda

Civic (FD1) 06-11 spring on damper rear

$1,395.00

CSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts,...

{"id":4667714797643,"title":"Civic (FD13) 06-11 spring oem location","handle":"civic-fd13-06-11-spring-oem-location","description":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/8k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-09-16T10:40:02-04:00","created_at":"2020-09-16T10:40:02-04:00","vendor":"CSE","type":"","tags":["CIVIC","HONDA"],"price":139500,"price_min":139500,"price_max":139500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32837271846987,"title":"8k\/8k","option1":"8k\/8k","option2":null,"option3":null,"sku":"YS01-HD-DPS015-8\/8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Civic (FD13) 06-11 spring oem location - 8k\/8k","public_title":"8k\/8k","options":["8k\/8k"],"price":139500,"weight":27216,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_d0464ef2-96fa-4192-a579-60a38c32cec5.jpg?v=1600267203"],"featured_image":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_d0464ef2-96fa-4192-a579-60a38c32cec5.jpg?v=1600267203","options":["Rates"],"media":[{"alt":null,"id":8078273413195,"position":1,"preview_image":{"aspect_ratio":1.776,"height":2432,"width":4320,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_d0464ef2-96fa-4192-a579-60a38c32cec5.jpg?v=1600267203"},"aspect_ratio":1.776,"height":2432,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_d0464ef2-96fa-4192-a579-60a38c32cec5.jpg?v=1600267203","width":4320}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/8k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

Honda

Civic (FD13) 06-11 spring oem location

$1,395.00

CSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts,...

{"id":4667722465355,"title":"Civic (FD2) 07-11","handle":"civic-fd2-07-11","description":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/7k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-09-16T10:50:39-04:00","created_at":"2020-09-16T10:50:39-04:00","vendor":"CSE","type":"","tags":["CIVIC","HONDA"],"price":139500,"price_min":139500,"price_max":139500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32837337448523,"title":"8k\/7k","option1":"8k\/7k","option2":null,"option3":null,"sku":"YS01-HD-DPS015-11 -8\/7","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Civic (FD2) 07-11 - 8k\/7k","public_title":"8k\/7k","options":["8k\/7k"],"price":139500,"weight":27216,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_04933b5b-887b-464f-b618-7b6c524e7b03.jpg?v=1600267840"],"featured_image":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_04933b5b-887b-464f-b618-7b6c524e7b03.jpg?v=1600267840","options":["Rates"],"media":[{"alt":null,"id":8078325612619,"position":1,"preview_image":{"aspect_ratio":1.776,"height":2432,"width":4320,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_04933b5b-887b-464f-b618-7b6c524e7b03.jpg?v=1600267840"},"aspect_ratio":1.776,"height":2432,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_04933b5b-887b-464f-b618-7b6c524e7b03.jpg?v=1600267840","width":4320}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/7k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

Honda

Civic (FD2) 07-11

$1,395.00

CSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts,...

{"id":4667719385163,"title":"Civic (FG\/FA) 06-11","handle":"civic-fg-fa-06-11","description":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/7k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-09-16T10:44:05-04:00","created_at":"2020-09-16T10:44:05-04:00","vendor":"CSE","type":"","tags":["CIVIC","HONDA"],"price":139500,"price_min":139500,"price_max":139500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32837298585675,"title":"8k\/7k","option1":"8k\/7k","option2":null,"option3":null,"sku":"YS01-HD-DPS015-10 -8\/7","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Civic (FG\/FA) 06-11 - 8k\/7k","public_title":"8k\/7k","options":["8k\/7k"],"price":139500,"weight":27216,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_490f2993-a063-4733-9429-e759803ba512.jpg?v=1600267446"],"featured_image":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_490f2993-a063-4733-9429-e759803ba512.jpg?v=1600267446","options":["Rates"],"media":[{"alt":null,"id":8078292058187,"position":1,"preview_image":{"aspect_ratio":1.776,"height":2432,"width":4320,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_490f2993-a063-4733-9429-e759803ba512.jpg?v=1600267446"},"aspect_ratio":1.776,"height":2432,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_490f2993-a063-4733-9429-e759803ba512.jpg?v=1600267446","width":4320}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/7k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

Honda

Civic (FG/FA) 06-11

$1,395.00

CSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts,...

{"id":4667724759115,"title":"Civic (FK3) 12+","handle":"civic-fk3-12","description":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/6k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-09-16T10:52:18-04:00","created_at":"2020-09-16T10:52:18-04:00","vendor":"CSE","type":"","tags":["CIVIC","HONDA"],"price":139500,"price_min":139500,"price_max":139500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32837347344459,"title":"8k\/6k","option1":"8k\/6k","option2":null,"option3":null,"sku":"YS01-HD-DPS036 -8\/6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Civic (FK3) 12+ - 8k\/6k","public_title":"8k\/6k","options":["8k\/6k"],"price":139500,"weight":27216,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_4f00547c-7581-4a0d-9069-264605e7fe2c.jpg?v=1600267939"],"featured_image":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_4f00547c-7581-4a0d-9069-264605e7fe2c.jpg?v=1600267939","options":["Rates"],"media":[{"alt":null,"id":8078336426059,"position":1,"preview_image":{"aspect_ratio":1.776,"height":2432,"width":4320,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_4f00547c-7581-4a0d-9069-264605e7fe2c.jpg?v=1600267939"},"aspect_ratio":1.776,"height":2432,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_4f00547c-7581-4a0d-9069-264605e7fe2c.jpg?v=1600267939","width":4320}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/6k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

Honda

Civic (FK3) 12+

$1,395.00

CSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts,...

{"id":4667734851659,"title":"Civic Si (FB) 14-15","handle":"civic-si-fb-14-16-rear-spring-on-damper","description":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/6k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-09-16T10:58:45-04:00","created_at":"2020-09-16T10:58:45-04:00","vendor":"CSE","type":"","tags":["CIVIC","HONDA"],"price":129500,"price_min":129500,"price_max":129500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32837405114443,"title":"8k\/8k","option1":"8k\/8k","option2":null,"option3":null,"sku":"YS01-HD-DPS046- 8\/8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Civic Si (FB) 14-15 - 8k\/8k","public_title":"8k\/8k","options":["8k\/8k"],"price":129500,"weight":27216,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_d2ec4f88-6f67-49d5-90bb-0d8eda98acb9.jpg?v=1600268326"],"featured_image":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_d2ec4f88-6f67-49d5-90bb-0d8eda98acb9.jpg?v=1600268326","options":["Rates"],"media":[{"alt":null,"id":8078384431179,"position":1,"preview_image":{"aspect_ratio":1.776,"height":2432,"width":4320,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_d2ec4f88-6f67-49d5-90bb-0d8eda98acb9.jpg?v=1600268326"},"aspect_ratio":1.776,"height":2432,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_d2ec4f88-6f67-49d5-90bb-0d8eda98acb9.jpg?v=1600268326","width":4320}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/6k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

Honda

Civic Si (FB) 14-15

$1,295.00

CSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts,...

Civic Si (FB) 12-13 rear spring separate

{"id":4667732000843,"title":"Civic Si (FB) 12-13 rear spring separate","handle":"civic-si-fb-12-13-rear-spring-separate","description":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/8k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-09-16T10:56:59-04:00","created_at":"2020-09-16T10:56:59-04:00","vendor":"CSE","type":"","tags":["CIVIC","HONDA"],"price":129500,"price_min":129500,"price_max":129500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32837385748555,"title":"8k\/8k","option1":"8k\/8k","option2":null,"option3":null,"sku":"YS01-HD-DPS045- 8\/8","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Civic Si (FB) 12-13 rear spring separate - 8k\/8k","public_title":"8k\/8k","options":["8k\/8k"],"price":129500,"weight":27216,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_2a746a45-401a-4295-9689-2195a3cef2de.jpg?v=1600268221"],"featured_image":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_2a746a45-401a-4295-9689-2195a3cef2de.jpg?v=1600268221","options":["Rates"],"media":[{"alt":null,"id":8078370635851,"position":1,"preview_image":{"aspect_ratio":1.776,"height":2432,"width":4320,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_2a746a45-401a-4295-9689-2195a3cef2de.jpg?v=1600268221"},"aspect_ratio":1.776,"height":2432,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_2a746a45-401a-4295-9689-2195a3cef2de.jpg?v=1600268221","width":4320}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/8k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

Honda

Civic Si (FB) 12-13 rear spring separate

$1,295.00

CSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts,...

{"id":4667741929547,"title":"Civic Type R (FK2) 15-18","handle":"civic-type-r-fk2-15-18","description":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/6k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-09-16T11:03:00-04:00","created_at":"2020-09-16T11:03:00-04:00","vendor":"CSE","type":"","tags":["CIVIC","HONDA"],"price":139500,"price_min":139500,"price_max":139500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32837447221323,"title":"8k\/6k","option1":"8k\/6k","option2":null,"option3":null,"sku":"YS01-HD-DPS055- 8\/6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Civic Type R (FK2) 15-18 - 8k\/6k","public_title":"8k\/6k","options":["8k\/6k"],"price":139500,"weight":27216,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_3665f77e-32cf-479f-a24a-2641e5b4afec.jpg?v=1600268581"],"featured_image":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_3665f77e-32cf-479f-a24a-2641e5b4afec.jpg?v=1600268581","options":["Rates"],"media":[{"alt":null,"id":8078415593547,"position":1,"preview_image":{"aspect_ratio":1.776,"height":2432,"width":4320,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_3665f77e-32cf-479f-a24a-2641e5b4afec.jpg?v=1600268581"},"aspect_ratio":1.776,"height":2432,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_3665f77e-32cf-479f-a24a-2641e5b4afec.jpg?v=1600268581","width":4320}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/6k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

Honda

Civic Type R (FK2) 15-18

$1,395.00

CSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts,...

{"id":4667747401803,"title":"Civic Type R (FK8) 17+","handle":"civic-type-r-fk8-17","description":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/6k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-09-16T11:07:18-04:00","created_at":"2020-09-16T11:07:18-04:00","vendor":"CSE","type":"","tags":["CIVIC","HONDA"],"price":139500,"price_min":139500,"price_max":139500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32837479366731,"title":"8k\/6k","option1":"8k\/6k","option2":null,"option3":null,"sku":"YS01-HD-DPS0573- 8\/6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Civic Type R (FK8) 17+ - 8k\/6k","public_title":"8k\/6k","options":["8k\/6k"],"price":139500,"weight":27216,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_4f4ff3fe-7477-4512-8eff-135ad4beba3e.jpg?v=1600268839"],"featured_image":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_4f4ff3fe-7477-4512-8eff-135ad4beba3e.jpg?v=1600268839","options":["Rates"],"media":[{"alt":null,"id":8078442725451,"position":1,"preview_image":{"aspect_ratio":1.776,"height":2432,"width":4320,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_4f4ff3fe-7477-4512-8eff-135ad4beba3e.jpg?v=1600268839"},"aspect_ratio":1.776,"height":2432,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/996kit2_4f4ff3fe-7477-4512-8eff-135ad4beba3e.jpg?v=1600268839","width":4320}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003eOur suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e※\u003c\/em\u003e\u003cem\u003e The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/6k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*higher rates available special order only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

Honda

Civic Type R (FK8) 17+

$1,395.00

CSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts,...

E30 ALL - 84-92 - Single adjustable damper kits 45mm strut housing

{"id":4665012387915,"title":"E30 ALL - 84-92 - Single adjustable damper kits 45mm strut housing","handle":"e30-all-84-92-single-adjustable-damper-kits-45mm-strut-housing","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003e Our suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e \u003cem\u003e※ The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e* We can wed your supplied spindle struts to our tubes contact us for more information! E30 and E30M3. \u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTECHNICAL INFORMATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e For suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e We use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT \u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e For FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/12k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e8k\/14k - Aggressive street\/Track\u003c\/p\u003e\n\u003cp\u003e10k\/14k - Track use only\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-09-10T14:14:35-04:00","created_at":"2020-09-10T14:14:35-04:00","vendor":"CSE","type":"","tags":["BMW","E30"],"price":149500,"price_min":149500,"price_max":149500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32824660099147,"title":"8k\/12k","option1":"8k\/12k","option2":null,"option3":null,"sku":"BE3045SV1812","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E30 ALL - 84-92 - Single adjustable damper kits 45mm strut housing - 8k\/12k","public_title":"8k\/12k","options":["8k\/12k"],"price":149500,"weight":27216,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32824660131915,"title":"8k\/14k","option1":"8k\/14k","option2":null,"option3":null,"sku":"BE3045VS1814","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E30 ALL - 84-92 - Single adjustable damper kits 45mm strut housing - 8k\/14k","public_title":"8k\/14k","options":["8k\/14k"],"price":149500,"weight":27216,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32824660164683,"title":"10\/14k","option1":"10\/14k","option2":null,"option3":null,"sku":"BE3045SV11014","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E30 ALL - 84-92 - Single adjustable damper kits 45mm strut housing - 10\/14k","public_title":"10\/14k","options":["10\/14k"],"price":149500,"weight":27216,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/1_f939161d-41d8-4c2a-9f4c-6a152d0f477f.jpg?v=1650030345","\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/2_30f8f25b-5d56-4781-9d53-90d7ad109387.jpg?v=1650030348","\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/4_017af523-840a-400a-a8ca-35f862e1bc3e.jpg?v=1650030356","\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/3_73612152-6e36-42e1-bcf1-57b4c83f9672.jpg?v=1650030359","\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/7_c48b8e36-f6f1-485b-ab16-2c6232a855c8.jpg?v=1650030368","\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/8_a3277d58-515b-428a-8de5-2c04f6fe68ec.jpg?v=1650030389","\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/5_4dd5a166-30d6-4015-9c0d-abdd1a358627.jpg?v=1650030389","\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/6_13f9a5e0-d1ce-4134-b8af-9b7480f96926.jpg?v=1650030389"],"featured_image":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/1_f939161d-41d8-4c2a-9f4c-6a152d0f477f.jpg?v=1650030345","options":["Rates"],"media":[{"alt":null,"id":21190122668107,"position":1,"preview_image":{"aspect_ratio":1.754,"height":1961,"width":3439,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/1_f939161d-41d8-4c2a-9f4c-6a152d0f477f.jpg?v=1650030345"},"aspect_ratio":1.754,"height":1961,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/1_f939161d-41d8-4c2a-9f4c-6a152d0f477f.jpg?v=1650030345","width":3439},{"alt":null,"id":21190122864715,"position":2,"preview_image":{"aspect_ratio":1.313,"height":2064,"width":2709,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/2_30f8f25b-5d56-4781-9d53-90d7ad109387.jpg?v=1650030348"},"aspect_ratio":1.313,"height":2064,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/2_30f8f25b-5d56-4781-9d53-90d7ad109387.jpg?v=1650030348","width":2709},{"alt":null,"id":21190122897483,"position":3,"preview_image":{"aspect_ratio":1.41,"height":1959,"width":2763,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/4_017af523-840a-400a-a8ca-35f862e1bc3e.jpg?v=1650030356"},"aspect_ratio":1.41,"height":1959,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/4_017af523-840a-400a-a8ca-35f862e1bc3e.jpg?v=1650030356","width":2763},{"alt":null,"id":21190123061323,"position":4,"preview_image":{"aspect_ratio":1.142,"height":2037,"width":2327,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/3_73612152-6e36-42e1-bcf1-57b4c83f9672.jpg?v=1650030359"},"aspect_ratio":1.142,"height":2037,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/3_73612152-6e36-42e1-bcf1-57b4c83f9672.jpg?v=1650030359","width":2327},{"alt":null,"id":21190123257931,"position":5,"preview_image":{"aspect_ratio":0.638,"height":2268,"width":1446,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/7_c48b8e36-f6f1-485b-ab16-2c6232a855c8.jpg?v=1650030368"},"aspect_ratio":0.638,"height":2268,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/7_c48b8e36-f6f1-485b-ab16-2c6232a855c8.jpg?v=1650030368","width":1446},{"alt":null,"id":21190123421771,"position":6,"preview_image":{"aspect_ratio":1.5,"height":2304,"width":3456,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/8_a3277d58-515b-428a-8de5-2c04f6fe68ec.jpg?v=1650030389"},"aspect_ratio":1.5,"height":2304,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/8_a3277d58-515b-428a-8de5-2c04f6fe68ec.jpg?v=1650030389","width":3456},{"alt":null,"id":21190123356235,"position":7,"preview_image":{"aspect_ratio":1.695,"height":1911,"width":3240,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/5_4dd5a166-30d6-4015-9c0d-abdd1a358627.jpg?v=1650030389"},"aspect_ratio":1.695,"height":1911,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/5_4dd5a166-30d6-4015-9c0d-abdd1a358627.jpg?v=1650030389","width":3240},{"alt":null,"id":21190123389003,"position":8,"preview_image":{"aspect_ratio":1.226,"height":1671,"width":2048,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/6_13f9a5e0-d1ce-4134-b8af-9b7480f96926.jpg?v=1650030389"},"aspect_ratio":1.226,"height":1671,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/6_13f9a5e0-d1ce-4134-b8af-9b7480f96926.jpg?v=1650030389","width":2048}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track.\u003c\/p\u003e\n\u003cp\u003e Our suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e \u003cem\u003e※ The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e* We can wed your supplied spindle struts to our tubes contact us for more information! E30 and E30M3. \u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTECHNICAL INFORMATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e For suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included fronts and rears (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e We use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT \u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e For FRONT MacPherson strut models, wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/12k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e8k\/14k - Aggressive street\/Track\u003c\/p\u003e\n\u003cp\u003e10k\/14k - Track use only\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

BMW

E30 ALL - 84-92 - Single adjustable damper kits 45mm strut housing

$1,495.00

CSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all...

E30.E36, Z3 Track CAB solid Control Arm Mounts

Sold Out

*Dropship: Contact us for availability. Solid Control Arm Mounts for your E30, E36, or Z3 are a hybrid mount/bushing set designed for drivers needing a solid control arm mounting solution without the added maintenance of spherical joints. The forged bracket is designed to increase caster for better high-speed stability, creating the same geometry found on an M3*. The mount incorporates Delrin bushings for a no-deflection design and extended service intervals. Turn-in and brake stability are also highly improved with this solid configuration. Another great feature of the TrackCAB set is the ease of installation - there is no need for a press, making installation a breeze. If used for racing, please verify that replacement of the bushing bracket is legal in your class.Features:Solid design without the maintenance of spherical bearingsIncorporates the offset design of Motorsport control arm bushings, increasing caster for better high-speed stabilityInstalls easily without the need for a pressCan...

*Dropship: Contact us for availability. Solid Control Arm Mounts for your E30, E36, or Z3 are a hybrid mount/bushing set...

{"id":9796562318,"title":"E30\/E36\/Z3 Delrin Control Arm Bushings","handle":"e30-e36-z3-delrin-control-arm-bushings","description":"\u003cp\u003e*Dropship: Contact us for availability.\u003c\/p\u003e\n\u003cp\u003eDelrin replacement pieces for the flimsy rubber oem bushings!\u003c\/p\u003e\n\u003cp\u003eThese tighten up the front of your E30\/36 primary use is for track or race cars. We have used these on street cars with silicone grease they have almost no added NVH noise.\u003c\/p\u003e\n\u003cp\u003e* we recomend drilling and taping thee to keep the bushing from rotating in the housing on both centered and offset version.\u003c\/p\u003e\n\u003cp\u003eAvailable pre pressed in housings.\u003c\/p\u003e","published_at":"2017-02-18T10:28:00-05:00","created_at":"2017-02-18T10:34:23-05:00","vendor":"BW","type":"Bushings","tags":[],"price":5999,"price_min":5999,"price_max":5999,"available":true,"price_varies":false,"compare_at_price":5999,"compare_at_price_min":5999,"compare_at_price_max":5999,"compare_at_price_varies":false,"variants":[{"id":35670502414,"title":"centered \/ Yes","option1":"centered","option2":"Yes","option3":null,"sku":"DFCAB3036H","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E30\/E36\/Z3 Delrin Control Arm Bushings - centered \/ Yes","public_title":"centered \/ Yes","options":["centered","Yes"],"price":5999,"weight":907,"compare_at_price":5999,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"continue","barcode":"DFCAB3036","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":35670889230,"title":"centered \/ no","option1":"centered","option2":"no","option3":null,"sku":"FCAB3036","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E30\/E36\/Z3 Delrin Control Arm Bushings - centered \/ no","public_title":"centered \/ no","options":["centered","no"],"price":5999,"weight":907,"compare_at_price":5999,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"continue","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":35670950606,"title":"offset \/ yes","option1":"offset","option2":"yes","option3":null,"sku":"FCABO3036H","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E30\/E36\/Z3 Delrin Control Arm Bushings - offset \/ yes","public_title":"offset \/ yes","options":["offset","yes"],"price":5999,"weight":907,"compare_at_price":5999,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"continue","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":35670700238,"title":"offset \/ no","option1":"offset","option2":"no","option3":null,"sku":"FCABO3036","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E30\/E36\/Z3 Delrin Control Arm Bushings - offset \/ no","public_title":"offset \/ no","options":["offset","no"],"price":5999,"weight":907,"compare_at_price":5999,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"continue","barcode":"DFCAB3036","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/BW_Delrin_Centered_Bushing_WM.jpg?v=1487432096","\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/suspension_hp_delrin_control_arm_bushing_offset_lg.jpg?v=1487432209"],"featured_image":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/BW_Delrin_Centered_Bushing_WM.jpg?v=1487432096","options":["Placement","Housing"],"media":[{"alt":null,"id":270423752779,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/BW_Delrin_Centered_Bushing_WM.jpg?v=1487432096"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/BW_Delrin_Centered_Bushing_WM.jpg?v=1487432096","width":1000},{"alt":null,"id":270424866891,"position":2,"preview_image":{"aspect_ratio":1.442,"height":416,"width":600,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/suspension_hp_delrin_control_arm_bushing_offset_lg.jpg?v=1487432209"},"aspect_ratio":1.442,"height":416,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/suspension_hp_delrin_control_arm_bushing_offset_lg.jpg?v=1487432209","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e*Dropship: Contact us for availability.\u003c\/p\u003e\n\u003cp\u003eDelrin replacement pieces for the flimsy rubber oem bushings!\u003c\/p\u003e\n\u003cp\u003eThese tighten up the front of your E30\/36 primary use is for track or race cars. We have used these on street cars with silicone grease they have almost no added NVH noise.\u003c\/p\u003e\n\u003cp\u003e* we recomend drilling and taping thee to keep the bushing from rotating in the housing on both centered and offset version.\u003c\/p\u003e\n\u003cp\u003eAvailable pre pressed in housings.\u003c\/p\u003e"}

E30/E36/Z3 Delrin Control Arm Bushings

$59.99

*Dropship: Contact us for availability. Delrin replacement pieces for the flimsy rubber oem bushings! These tighten up the front of your E30/36 primary use is for track or race cars. We have used these on street cars with silicone grease they have almost no added NVH noise. * we recomend drilling and taping thee to keep the bushing from rotating in the housing on both centered and offset version. Available pre pressed in housings.

*Dropship: Contact us for availability. Delrin replacement pieces for the flimsy rubber oem bushings! These tighten up the front of...

E36 ALL - 92-99 - Double adjustable remote

BMW

E36 ALL - 92-99 - Double adjustable remote

Sold Out

CSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on the track. Double adjustable remote reservoir canisters! We have developed our double adjustable remote canister dampers sets, after testing and R&D work over a year of development to get them finished. We are now able to offer them for sale! We are proud to offer this as an option for those wanting a true remote reservoir damper set. They allow individual damper adjustments for rebound and compression. These are also available as a true coilover in the rear, special order only. Full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and...

CSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all...

E36 ALL - 92-99 - Single adjustable damper kits

{"id":4653463076939,"title":"E36 ALL - 92-99 - Single adjustable damper kits","handle":"single-adjustable-coilover-kit-bmw-e36-all","description":"\u003cp\u003e CSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on track.\u003c\/p\u003e\n\u003cp\u003e Our suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e \u003cem\u003e※ The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTECHNICAL INFORMATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included front and rear (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT \u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models a wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/10k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e10k\/12k - Aggressive street\/Track\u003c\/p\u003e\n\u003cp\u003e12k\/14k - Recommended for cars with aero and slicks\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-08-24T10:22:52-04:00","created_at":"2020-08-24T10:22:51-04:00","vendor":"CSE","type":"","tags":["BMW","E36"],"price":149500,"price_min":149500,"price_max":149500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32778696360011,"title":"8k\/10k","option1":"8k\/10k","option2":null,"option3":null,"sku":"BE3600SV1810","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E36 ALL - 92-99 - Single adjustable damper kits - 8k\/10k","public_title":"8k\/10k","options":["8k\/10k"],"price":149500,"weight":27216,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32778696392779,"title":"10k\/12k","option1":"10k\/12k","option2":null,"option3":null,"sku":"BE3600SV11012","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E36 ALL - 92-99 - Single adjustable damper kits - 10k\/12k","public_title":"10k\/12k","options":["10k\/12k"],"price":149500,"weight":27216,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32778696458315,"title":"12k\/14k","option1":"12k\/14k","option2":null,"option3":null,"sku":"BE3600SV11214","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"E36 ALL - 92-99 - Single adjustable damper kits - 12k\/14k","public_title":"12k\/14k","options":["12k\/14k"],"price":149500,"weight":27216,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/E36S1.jpg?v=1649794920","\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/E36S1wavywasher.jpg?v=1649794949","\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/e36S1Camber2.jpg?v=1649794958","\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/E36swaybarlinks.jpg?v=1649794964"],"featured_image":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/E36S1.jpg?v=1649794920","options":["Rates"],"media":[{"alt":null,"id":21186073657419,"position":1,"preview_image":{"aspect_ratio":2.062,"height":1508,"width":3109,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/E36S1.jpg?v=1649794920"},"aspect_ratio":2.062,"height":1508,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/E36S1.jpg?v=1649794920","width":3109},{"alt":null,"id":21186074116171,"position":2,"preview_image":{"aspect_ratio":1.5,"height":2304,"width":3456,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/E36S1wavywasher.jpg?v=1649794949"},"aspect_ratio":1.5,"height":2304,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/E36S1wavywasher.jpg?v=1649794949","width":3456},{"alt":null,"id":21186074148939,"position":3,"preview_image":{"aspect_ratio":1.061,"height":1933,"width":2050,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/e36S1Camber2.jpg?v=1649794958"},"aspect_ratio":1.061,"height":1933,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/e36S1Camber2.jpg?v=1649794958","width":2050},{"alt":null,"id":21186074181707,"position":4,"preview_image":{"aspect_ratio":0.709,"height":1483,"width":1052,"src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/E36swaybarlinks.jpg?v=1649794964"},"aspect_ratio":0.709,"height":1483,"media_type":"image","src":"\/\/contactsuspensionengineering.com\/cdn\/shop\/products\/E36swaybarlinks.jpg?v=1649794964","width":1052}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e CSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on track.\u003c\/p\u003e\n\u003cp\u003e Our suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance.\u003c\/p\u003e\n\u003cp\u003e \u003cem\u003e※ The linear rate spring can be selected with tailored setup of the coilover to meet your needs without any other additional charge, please talk to us about your requirements before placing an order, or select one of our suggested spring rate combinations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTECHNICAL INFORMATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePILLOW BALL UPPER MOUNT W\/ ADJUSTABLE CAMBER PLATE or ALUMINUM UPPER MOUNT \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a MacPherson strut type, the pillow ball mounts with adjustable camber plates are included front and rear (where applicable).\u003c\/p\u003e\n\u003cp\u003eFor suspension systems utilizing a Double A-Arm strut type, this kit comes standard with aluminum upper mounts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INTERNAL DESIGN\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe use a needle valve for damper adjustments. A high rigidity 52mm shock body used for MacPherson strut type for extra oil capacity enables the damping force to have optimal linear change. High quality oil seals are utilized to withstand high temperatures and to prevent oil from escaping. The piston rod is made from high quality S45C steel and is processed with Thermal Refining and High-frequency Induction hardening treatments for rigidity and durability. Our damper stroke movement has been tested on advanced testing equipment. We test them to equal a vehicle with 5-years of mileage. Each component of the suspension system is rigorously inspected and strictly tested to avoid any failure.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHIGH RIGIDITY STEEL SPRING \u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eSprings are produced from high quality SAE9254 steel for optimal durability and high tensile strength. The spring rate and shape remains unchanged over the life of the springs, even if the spring has been subjected to long term wear.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADJUSTABLE SPRING SEAT \u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eOur spring seats are made from forged aluminum for durability and rigidity, most kits have CNC perches not cast.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHOCK BODY\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eShock body is coated with Electroplating treatment to prevent rust and corrosion in the harsh conditions from street use to motorsports. We use all black to maintain a clean look.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWAVE ALLOY STEEL THRUST WASHER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor FRONT MacPherson strut models a wave alloy steel thrust washer is installed between a lower locking collar and a bottom mount. The wave thrust washer can provides a lower locking ability with the collar and the bottom mount to effectively prevent the lower bracket from spinning around or becoming loose. We also recommend how to properly tighten these in our instructions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING BEARING TOP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpring bearing top is mounted under the pillowball bearing mount to eliminate the spring noise caused by spring bind from compression and rebound movements. This enables the spring and the shock to perform together more effectively without binding. In the rear on separated spring\/damper kits we recommend the optional use of a Torrington bearing for the same reason.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPRING RATES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e8k\/10k - Street\/HPDE\u003c\/p\u003e\n\u003cp\u003e10k\/12k - Aggressive street\/Track\u003c\/p\u003e\n\u003cp\u003e12k\/14k - Recommended for cars with aero and slicks\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

BMW

E36 ALL - 92-99 - Single adjustable damper kits

$1,495.00

CSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts, street, track, race, wanting excellent handling without sacrificing comfort on the street, or performance on track. Our suspension system features 33-way dampening adjustment and full length adjustment on the body for ride height, and separate spring preloading. We feel this design is superior to the full droop travel of a lot of damper systems which reduces travel and puts the piston at the lower part of the damper body. Because of this design we can utilize short stroke damper design. The lower mounts are manufactured from lightweight alloy aluminum, or high tensile steel for strength depending on the model. The pillow ball top mounts, camber plates in some applications, are used on McPherson struts for maximum handling and performance. ※ The linear rate spring can be selected with tailored setup...

CSE coilovers are designed and developed from years of competition and testing, we have spring rates developed for all enthusiasts,...

Products

Contact Us

Simod

Follow Us